Unified Ingest, Playback and Output Software

AJA Desktop Software Installer v18 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v18

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v18 for macOS:

ATTENTION: macOS installation instructions have changed. Please read the installation guide or watch this short video >>before<< installing!

NOTE: v18 is not compatible with Intel-based macOS systems – You must use v17.6 software below in the Software Archive.

AJA Desktop Software v18 transitions from legacy Kernel Extensions (KEXT) to Apple’s modern Driver Extension (DEXT) framework, which requires a clean uninstall and an updated installation process. 

Important Installation Requirements:

• Before installing, you must run the AJA v18 Uninstaller (included in this download) and reboot your system. This step removes the KEXT drivers. Failure to do so will cause the Desktop v18 installer to abort. Do not use uninstallers from previous versions (v17.x or earlier).
• AJA Desktop Software v18 is supported on Apple silicon Macs only, running macOS 14 Sonoma or later. Intel-based systems are not supported—please use Desktop Software v17.6 instead.

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v18 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v18

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v18 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v18:

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.6 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.6

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.6 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.6

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.6 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details. 

Apple silicon macOS security instructions are found here.

The following AJA applications are installed in v17.6

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.6 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.6:

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.5 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details. 

Apple silicon macOS security instructions are found here.

The following AJA applications are installed in v17.5

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.5 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.5

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.5 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.5:

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.5 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.5

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.1.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details. 

Apple silicon macOS security instructions are found here.

The following AJA applications are installed in v17.1.3

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1.3 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1.3:

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.1.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.1.3

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1.3 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1.3

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1 installer for Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1:

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1 installer for Rocky Linux versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.1

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.1

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.0.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.0.1

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.0.1 installer for Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.0.1:

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.0.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.0.1

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.0.1 installer for Rocky Linux versions 8.5 to 8.9 and 9.0 to 9.3/CentOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.0.1

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17 installer for Rocky Linux versions 8.5 and 9.3/CentOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17 installer for Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17:

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.6 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.6 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.6 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.6 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.5 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.5 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.5 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.5 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.4 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.4 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.4 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.4 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.3 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.3 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.2 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.2 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.1 of the AJA Desktop Software installer for Linux - Ubuntu 16.04 LTS, Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.1 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.3

• AJA Control Panel v16.0.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.3

• AJA Control Panel v16.0.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.0.2 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.0.2 of the AJA Desktop Software installer for Linux - Ubuntu 16.04 LTS, Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete details.

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete details.

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

AJA has been excitedly working in preparation for compatibility between our latest Desktop Software and macOS Big Sur.

As per Release Notes, AJA’s current v15.5.3 Desktop Software package officially supports up to macOS Catalina.

We would therefore encourage our customers to stay on macOS Catalina or earlier and await the arrival of the next version of AJA’s Desktop Software package. Otherwise, if upgrading to Big Sur is immediately necessary, we strongly encourage carefully testing a limited number of systems before upgrading all to ensure full compatibility.

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.3 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.3 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.1 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.1 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.2 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.3 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.3 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.2 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.2

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOS v15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.2:

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOS v15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOSv15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes a large range of new features and enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOSv15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.1 of the AJA Desktop Software installer for  Redhat/CentOS7 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

v15.1 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

AJA Software Installer v15.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

AJA Software Installer v15.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

v15.0.1 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

v15.0.1 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

Important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

v15.0.1 of the AJA Desktop Software installer for Linux - Ubuntu 16-18 includes all AJA hardware drivers for KONA products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 and other enhancements. Please read the Release Notes for complete details.

v15.0.1 of the AJA Desktop Software installer for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 for KONA IP and other enhancements. Please read the Release Notes for complete details.

v15.0 of the AJA Desktop Software installer for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 for KONA IP and other enhancements. Please read the Release Notes for complete details.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software, please ensure that you have contacted your 3^rdparty vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rdParty Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

v15.0 of the AJA Desktop Software installer for Linux - Ubuntu 16-18 includes all AJA hardware drivers for KONA products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 and other enhancements. Please read the Release Notes for complete details.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software, please ensure that you have contacted your 3^rdparty vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rdParty Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

v15.0 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

mportant note: With the introduction of macOSHigh Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOSversion and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software outside of the above mentioned in-built support for AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast included in this release, please ensure that you have contacted your 3^rdparty vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rdParty Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

v15.0 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software outside of the above mentioned in-built support for AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast included in this release, please ensure that you have contacted your 3^rd party vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rd Party Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

This installer v14.3 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements including SMPTE ST 2110 support for KONA IP. Please read the Release Notes for complete details.

This installer v14.3 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements including SMPTEST 2110 support for KONA IP. Please read the Release Notes for complete details.

Important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

AJA Software Installer v14.3 for Linux - Ubuntu 16-18 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers support for SMPTE ST 2110 for KONA IP and other enhancements. Please read the Release Notes for complete details.

v15.0 of the AJA Desktop Software installer for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Panel, AJA Control Room and associated software.

This major update offers support for SMPTE ST 2110 for KONA 5 and other enhancements. Please read the Release Notes for complete details.

AJA Software Installer v14.2.1 for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

AJA Software Installer v14.2 for Linux - Ubuntu 14-16 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

This installer v14.2.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

This installer v14.2.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products. 

This update offers a range of enhancements. Please read the Release Notes for complete details.

Important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

AJA Software Installer v14.2 for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

AJA Software Installer v14.2 for Linux - Ubuntu 14-16 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

This installer v14.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

This installer v14.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

This installer v14.0.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

This installer v14.0.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

AJA Software Installer v14.0.1 for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

AJA Software Installer v14.0.1 for Linux - Ubuntu 14-16 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

This installer v14.0.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details

This installer v14.0.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

This installer v14.0 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This major update offers firmware support for the new Io 4K Plus and new features for KONA, Io and T-TAP products including an update to the audio tab in Control Panel software. Please read the Release Notes for complete details.

This installer v14.0 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This major update offers firmware support for the new Io 4K Plus and new features for KONA, Io and T-TAP products including an update to the audio tab in Control Panel software. Please read the Release Notes for complete details

This installer v13.0.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

Please read the Release Notes for complete details.

AJA Software Installer v13.0  for Linux - Ubuntu 14-16 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers numerous new features. Please read the Release Notes for complete details.

AJA Software Installer v13.0  for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Room and associated software.

This major update offers numerous new features. Please read the Release Notes for complete details.

This installer v13.0 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This major update offers numerous new features for KONA, Io and T-TAP products. Please read the Release Notes for complete details.

This installer v13.0 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This major update offers numerous new features for KONA, Io and T-TAP products. Please read the Release Notes for complete details.

This installer v12.5.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update offers new support for Anamorphic SD workflows in AJA Control Room and addresses several issues across various software applications

Please read the Release Notes for complete details.

This installer v12.5.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update offers new support for Anamorphic SD workflows in AJA Control Room and addresses several issues across various software applications.

Please read the Release Notes for complete details.

This installer v12.5.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update offers new support for Anamorphic SD workflows in AJA Control Room and addresses several issues across various software applications.

Please read the Release Notes for complete details.

This installer v12.5 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update offers new support for and addresses several issues across various software applications.

Please read the Release Notes for complete details.

This installer v12.4.2  includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This  update offers new support for and addresses several issues across various software applications.

Please read the Release Notes  for complete details.

This installer v12.4.2  includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This  update offers new support for and addresses several issues across various software applications.

Please read the Release Notes  for complete details.

This installer v12.4.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This  update offers new support for and addresses several issues across various software applications and new support for KONA IP.

Please read the Release Notes for complete details.

This installer v12.4.1  includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This  update offers new support for and addresses several issues across various software applications and new support for KONA IP.

Please read the Release Notes for complete details.

This installer v12.4  includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This  update offers new support for and addresses several issues across various software applications and new support for KONA IP.

Please read the Release Notes for complete details.

This installer v12.4  includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This  update offers new support for and addresses several issues across various software applications and new support for KONA IP.

Please read the Release Notes for complete details.

This installer includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This maintenance update addresses several issues across various software applications

Please read the Release Notes for complete details.

This installer includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This maintenance update addresses several issues across various software applications

Please read the Release Notes for complete details.

This installer includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update addresses several issues across various software applications and hardware devices.

Please read the Release Notes for complete details.

This installer includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update addresses several issues across various software applications and hardware devices.

Please read the Release Notes for complete details.

This installer includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This maintenance update addresses several issues across various software applications

Please read the Release Notes for complete details.

This installer includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package.

This update adds the ability to capture and play back AJA Raw with Io 4K and KONA 4 along with support for Avid DNxHR and many other new features and improvements.

Please read the Release Notes for complete details.

This installer combines all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast into a single, unified package as well as adding new features and improvements.

Please read the Release Notes for complete details.

AJA Control Room Manual v18

AJA Desktop Software v18 macOS Installation Guide for download. You can also watch this short video.

Python tutorial document and example python scripts to accompany the AJA Control Room™ tutorial.

NOTE:Our implementation is based upon Python v2.7 Version 3.4 will not work.

Please download the PDF for information on AJA and QuickTime 7 for Windows as of May 2016.