Streamlined Capture and Playback over 3G-SDI

AJA Desktop Software Installer v18 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v18

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v18 for macOS:

ATTENTION: macOS installation instructions have changed. Please read the installation guide or watch this short video >>before<< installing!

NOTE: v18 is not compatible with Intel-based macOS systems – You must use v17.6 software below in the Software Archive.

AJA Desktop Software v18 transitions from legacy Kernel Extensions (KEXT) to Apple’s modern Driver Extension (DEXT) framework, which requires a clean uninstall and an updated installation process. 

Important Installation Requirements:

• Before installing, you must run the AJA v18 Uninstaller (included in this download) and reboot your system. This step removes the KEXT drivers. Failure to do so will cause the Desktop v18 installer to abort. Do not use uninstallers from previous versions (v17.x or earlier).
• AJA Desktop Software v18 is supported on Apple silicon Macs only, running macOS 14 Sonoma or later. Intel-based systems are not supported—please use Desktop Software v17.6 instead.

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v18 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v18

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v18 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v18:

• AJA Control Panel v18: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v18: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v18: 
  • For high quality capture, monitoring, playback and output.

These filters are designed for DirectShow application developers, so that they may make their applications compatible with the majority of AJA's windows based hardware. These filters are meant to be used programmatically, and will not necessarily work with every DirectShow application without work being done to explicitly support them. Note: DirectShow is a trademark of Microsoft.

AJA Desktop Software v17.6 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.6

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.6 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.6

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.6 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details. 

Apple silicon macOS security instructions are found here.

The following AJA applications are installed in v17.6

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.6 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.6:

• AJA Control Panel v17.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.6: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.5 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details. 

Apple silicon macOS security instructions are found here.

The following AJA applications are installed in v17.5

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.5 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.5

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5:
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.5 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.5:

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software v17.5 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.5

• AJA Control Panel v17.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.5: 
  • For high quality capture, monitoring, playback and output.

AJA Desktop Software Installer v17.1.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details. 

Apple silicon macOS security instructions are found here.

The following AJA applications are installed in v17.1.3

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1.3 Installer Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1.3:

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.1.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.1.3

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1.3 installer for Rocky Linux up to versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1.3

• AJA Control Panel v17.1.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1 installer for Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1:

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.1 installer for Rocky Linux versions 8.10 and 9.4:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.1

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.1

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.1

• AJA Control Panel v17.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.0.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.0.1

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.0.1 installer for Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver, and firmware package contains everything you need to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.0.1:

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17.0.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17.0.1

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17.0.1 installer for Rocky Linux versions 8.5 to 8.9 and 9.0 to 9.3/CentOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17.0.1

• AJA Control Panel v17.0.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17.0.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17.0.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17.0.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software Installer v17 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v17

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17 installer for Rocky Linux versions 8.5 and 9.3/CentOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Desktop Software v17 installer for Linux - Ubuntu 20.04 LTS and Ubuntu 22.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v17:

• AJA Control Panel v17: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v17: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v17: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v17: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.6 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.6 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.6 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.6 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.6

• AJA Control Panel v16.2.6: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.6: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.6: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.6: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.5 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.5 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.5 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.5 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.5

• AJA Control Panel v16.2.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.4 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.4 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.4 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.4 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.4

• AJA Control Panel v16.2.4: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.4: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.4: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.4: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.3 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.3 of the AJA Desktop Software installer for Redhat/CentOS 7:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.3

• AJA Control Panel v16.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.2 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2.2 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2.2

• AJA Control Panel v16.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.2 of the AJA Desktop Software installer for Linux - Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.2

• AJA Control Panel v16.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.1 of the AJA Desktop Software installer for Linux - Ubuntu 16.04 LTS, Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.1 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.1

• AJA Control Panel v16.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.3

• AJA Control Panel v16.0.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.3

• AJA Control Panel v16.0.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features including as well as maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.0.2 of the AJA Desktop Software installer for Redhat/CentOS 7 and Redhat/CentOS 8:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16.0.2 of the AJA Desktop Software installer for Linux - Ubuntu 16.04 LTS, Ubuntu 18.04 LTS and Ubuntu 20.04 LTS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16.0.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16.0.2

• AJA Control Panel v16.0.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16.0.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16.0.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16.0.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete details.

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v16 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete details.

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v16 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes new features as well as maintenance updates. New features for a range of I/O products include HDR over SDI, HDR Auto Playback Detection, 4K Closed Caption Support, NMO3 v1.3 Support, LLDP Support, 8K NLE/VFX Software Support, 8K Capture and Playback and Dynamic FPGA Firmware Reconfiguration. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v16

• AJA Control Panel v16: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v16: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v16:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v16: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

AJA has been excitedly working in preparation for compatibility between our latest Desktop Software and macOS Big Sur.

As per Release Notes, AJA’s current v15.5.3 Desktop Software package officially supports up to macOS Catalina.

We would therefore encourage our customers to stay on macOS Catalina or earlier and await the arrival of the next version of AJA’s Desktop Software package. Otherwise, if upgrading to Big Sur is immediately necessary, we strongly encourage carefully testing a limited number of systems before upgrading all to ensure full compatibility.

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.3 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.3 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.3

• AJA Control Panel v15.5.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.5.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.1 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5.1 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5.1

• AJA Control Panel v15.5.1: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5.1: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5.1: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.5.1: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.5 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.5 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.5

• AJA Control Panel v15.5: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.5: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.5:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.5: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

These filters are designed for DirectShow application developers, so that they may make their applications compatible with the majority of AJA's windows based hardware. These filters are meant to be used programmatically, and will not necessarily work with every DirectShow application without work being done to explicitly support them. Note: DirectShow is a trademark of Microsoft.

v15.2.2 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.2: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.3 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.3 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.3 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.3 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.3

• AJA Control Panel v15.2.3: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.3: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.3: 
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.2.3: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2.2 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room
  • For high quality capture, monitoring, playback and output.
• AJA NMOSv15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes maintenance updates. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.2.2

• AJA Control Panel v15.2.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA Control Room v15.2.2:
  • For high quality capture, monitoring, playback and output.
• AJA NMOS v15.2.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.2

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOS v15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

AJA Software Installer v15.2 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.2:

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOS v15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOSv15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.2 of the AJA Desktop Software installer for  Redhat/CentOS7:

This unified software, driver and firmware package contains everything you need in orr to start using your AJA video I/O hardware and includes a large range of new features and enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.2

• AJA Control Panel v15.2: 
  • For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.
  • For high quality capture, playback and output.
• AJA System Test v15.2: 
  • For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).
• AJA NMOSv15.2: 
  • An optional component providing discovery, registration and control for KONA IP running in SMPTE ST 2110 environments.

v15.1 of the AJA Desktop Software installer for  Redhat/CentOS7 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements.. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

v15.1 of the AJA Desktop Software installer for Linux - Ubuntu 16-18:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete details.

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

AJA Software Installer v15.1 for macOS:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

Important note for macOS users:

With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

AJA Software Installer v15.1 for Windows:

This unified software, driver and firmware package contains everything you need in order to start using your AJA video I/O hardware and includes a large range of new features and enhancements. Please read the Release Notes for complete detail. 

The following AJA applications are installed in v15.1:

• AJA Control Panel v15.1: For setup and control of your AJA KONA, Io or T-TAP product, including firmware updates.

• AJA Control Room v15.1: For high quality capture, playback and output.

• AJA System Test v15.1: For testing storage to determine if it will be possible to sustain frame rates for chosen format(s).

v15.0.1 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

v15.0.1 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

Important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

v15.0.1 of the AJA Desktop Software installer for Linux - Ubuntu 16-18 includes all AJA hardware drivers for KONA products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 and other enhancements. Please read the Release Notes for complete details.

v15.0.1 of the AJA Desktop Software installer for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 for KONA IP and other enhancements. Please read the Release Notes for complete details.

v15.0 of the AJA Desktop Software installer for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 for KONA IP and other enhancements. Please read the Release Notes for complete details.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software, please ensure that you have contacted your 3^rdparty vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rdParty Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

v15.0 of the AJA Desktop Software installer for Linux - Ubuntu 16-18 includes all AJA hardware drivers for KONA products, AJA Control Panel, AJA Control Room and associated software.

This major update offers new support for KONA 5 and other enhancements. Please read the Release Notes for complete details.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software, please ensure that you have contacted your 3^rdparty vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rdParty Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

v15.0 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

mportant note: With the introduction of macOSHigh Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOSversion and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software outside of the above mentioned in-built support for AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast included in this release, please ensure that you have contacted your 3^rdparty vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rdParty Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

v15.0 of the AJA Desktop Software installer includes all AJA hardware drivers, AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update includes important new support for KONA 5. Please read the Release Notes for complete details.

IMPORTANT NOTE: 

If you plan on utilizing AJA Desktop Software v15 with third party software outside of the above mentioned in-built support for AJA Control Panel, AJA Control Room and plug-ins for Apple, Adobe CC, Avid and Telestream Wirecast included in this release, please ensure that you have contacted your 3^rd party vendor and have confirmed that their latest software has been updated to support AJA Desktop Software v15 retail software and drivers. If not or unsure, please do not utilize AJA Desktop v15 and remain on or revert to earlier v14.x AJA Desktop Software until you have confirmed that your 3^rd Party Software is indeed compatible with AJA’s latest drivers and software.

If you are a third party software vendor and have any questions regarding v15.0 support, please log in to https://sdksupport.aja.com  for further information or apply for AJA SDK support at https://www.aja.com/developer/request

This installer v14.3 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements including SMPTE ST 2110 support for KONA IP. Please read the Release Notes for complete details.

This installer v14.3 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements including SMPTEST 2110 support for KONA IP. Please read the Release Notes for complete details.

Important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

AJA Software Installer v14.3 for Linux - Ubuntu 16-18 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers support for SMPTE ST 2110 for KONA IP and other enhancements. Please read the Release Notes for complete details.

v15.0 of the AJA Desktop Software installer for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Panel, AJA Control Room and associated software.

This major update offers support for SMPTE ST 2110 for KONA 5 and other enhancements. Please read the Release Notes for complete details.

AJA Software Installer v14.2.1 for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

AJA Software Installer v14.2 for Linux - Ubuntu 14-16 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

This installer v14.2.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

This installer v14.2.1 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products. 

This update offers a range of enhancements. Please read the Release Notes for complete details.

Important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

AJA Software Installer v14.2 for Linux - Redhat/CentOS7 includes all AJA hardware drivers for KONA Products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

AJA Software Installer v14.2 for Linux - Ubuntu 14-16 includes all AJA hardware drivers for KONA products, AJA Control Room and associated software.

This major update offers numerous new features and optimizations for installation. Please read the Release Notes for complete details.

This installer v14.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

important note: With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device). Depending on your macOS version and AJA Desktop Software installation history, different installation outcomes are possible. Please see the release notes for detailed information and troubleshooting options.

This installer v14.2 includes all AJA hardware drivers, AJA Control Room and plug-ins for Adobe, Avid and Wirecast in a single, unified package for KONA, Io and T-TAP products.

This update offers a range of enhancements. Please read the Release Notes for complete details.

This KONA Series Manual v18 covers the installation and operation of the following AJA KONA cards:

• KONA 5
• KONA 4
• KONA 1

(Please see specific support pages for other KONA products such as KONA LHi, KONA LHe Plus, KONA HDMI, KONA IP25)

AJA Control Room Manual v18

AJA Desktop Software v18 macOS Installation Guide for download. You can also watch this short video.

AJA KONA Quick Start Guide for Desktop 18 Software

AJA OBS Quick Start Guide v17.1

AJA Adobe Apps Quick Start Guide v17r1

AJA KONA Quick Start Guide for Desktop 17 Software

AJA Telestream Apps Quick Start Guide v16.2:

The AJA Wirecast plug-in supports Wirecast 12x, 11.x, 10.x, 9.x, 8.x, 7.x, 6.x from Telestream.

Telestream Wirecast is supported through the AJA Desktop Software for the following AJA devices:

• KONA 5, KONA 4, KONA HDMI, KONA IP, KONA 1, KONA 3G, KONA LHi, KONA LHe Plus

• CORVID HB-R

• Io 4K Plus, Io 4K, Io IP, Io XT, Io Express

• T-TAP Pro

• T-TAP

• Telestream Wirecast is also supported through the AJA Desktop Software for the following Avid devices:

• Avid Artist | DNxIV

• Avid Artist | DNxIP

AJA vMix Quick Start Guide v16.1:

AJA I/O devices support a broad range of creative software, including vMix, a complete 4K/UltraHD or multi-channel live video production application. This document gives you some general procedures for setting up AJA I/O devices with vMix, including selecting live video inputs, adding audio sources, and sending your produced video out from vMix.

Important macOS Mojave installation information

• With the introduction of macOS Mojave (v10.14), Apple now requests that third party kernel extensions be “notarized” by Apple. AJA’s device driver kernel extension has been notarized starting with AJA Software version 15.2. Apple has indicated that for security purposes, future macOS versions may prevent the loading of unnotarized device drivers, in which case, AJA software prior to v15.2 will result in AJA devices failing to operate (Unsupported AJA Device)

Important macOS High Sierra installation information

• With the introduction of macOS High Sierra (v10.13), Apple now requires that third party application developers be identified during kernel extension installations. Failure to do so will make AJA devices fail to operate (Unsupported AJA Device).

• Depending on your macOS version and AJA Desktop Software installation history, the following installation outcomes are possible:

◦ macOS Sierra and Earlier Supported Versions

- No problems exist for AJA software installation or updates with these earlier versions of macOS.

◦ Earlier macOS to High Sierra Update

- No problems should occur if the AJA Desktop Software package is already installed on macOS Sierra (or earlier) and then update your Mac to High Sierra. The identification of AJA as a trusted developer is “grandfathered in” to High Sierra.

◦ macOS High Sierra First AJA Desktop Software Install

- No problems should occur if your Mac is running High Sierra macOS, you install AJA Desktop Software for the first time, and you follow the instructions shown during installation (Figure 1).

- Do NOT click OK (Figure 1). 

Figure 1 — First-time installation on macOS High Sierra

Instead, click Open Security Preferences (or go to System Preferences>Security and Privacy) and then click Allow for AJA Video Systems (Figure 2).

Figure 2 — click Allow for AJA Video Systems 

NOTE: If after successful installation, you remove AJA applications from your computer using the AJA Uninstaller developer identification is retained by macOS High Sierra. Reinstallation should proceed without any problems.

• Recovery from Installation Approval Failure:

◦ If you clicked OK during installation and skipped the developer approval step, the AJA Desktop Software installation will complete, but macOS’ GateKeeper security will prevent AJA’s device driver from loading, and AJA devices will not operate (Unsupported AJA Device).

◦ Apple has allowed a time window, within which you can belatedly approve a developer after installation. If you go to System Preferences>Security and Privacy, within 30 minutes of installation, the developer message and Allow button will be available for use. After 30 minutes, however, the message and button are removed from the window. Recovery from this involves uninstalling all AJA files (some manually), reinstalling the AJA Desktop Software package, and clicking on Allow for AJA Video Systems developer. 

• Recovery from Installation Approval Failure (2nd Level if necessary)

1. Run the AJA Uninstaller, located in the AJA Utilities folder in the Mac Applications folder.

2. Access the Users Library, which is hidden. To access the library:

3. Go to the Finder.

- In the Finder Menu Bar and click on Go.

- Hold down the Option key. The Library folder appears as long as the Option key is held down.

- Go to Library>Preferences and delete all com.aja.*.* files. There may be one file or several files.

4. Remove AJA Control Panel from the Dock, if applicable.

5. Restart the Mac.

6. Install the AJA Desktop Software package.

7. During installation, click on Open Security Preferences (or go to System Preferences,>Security and Privacy).

8. Under the General tab, click on the Allow button for AJA Video Systems. The button is only available for 30 minutes.