KONA for PC Supported System Configurations
The AJA support and engineering team target only Enterprise Class Workstations. The slot placement is based on an engineering analysis of the motherboard for performance and available bandwidth. These are the required HD / 2K workflow configurations for the KONA product line.
Expansion Slot Placement for: HP Z800 |
|
|
|
At this time AJA supports the KONA 3, LHi & LSe for 2K / HD / SD editing on the HP Z800 Workstation. Slot placement for the LSe is not as crucial for SD editing. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: HP Z600 |
|
|
At this time AJA supports the KONA 3, LHi & LSe for 2K / HD / SD editing on the HP Z600 Workstation. Slot placement for the LSe is not as crucial for SD editing. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: Dell T7500 |
|
|
|
At this time AJA supports the KONA 3, LHi & LSe for 2K / HD / SD editing on the T7500 Workstation. Slot placement for the LSe is not as crucial for SD editing. Based on chipset similarities the T5500 should also work with the same 3 / LHi slot configurations |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: Boxx 8500 |
|
|
|
At this time AJA supports the KONA 3, LHi & LSe for 2K / HD / SD editing on the Boxx 8500 Workstation. Slot placement for the LSe is not as crucial for SD editing. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: HP XW8600 |
|
|
For a motherboard block diagram Additional Notes* To use Slot 5 the BIOS must be |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: Tyan i5396 |
|
|
|
For a motherboard block diagram
Additional Notes* The PCI-X Bus, slots 1 and 2 are a shared bus. If you use the KONA card in any of the PCI-X slots the remaining slots must be empty.
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: Dell T7400 |
|
|
|
For a motherboard block diagram
Additional Notes* The PCI-X Bus, slots 5, 6 and 7 are a shared bus. If you use the KONA card in any of the PCI-X slots the remaining slots must be empty. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: Dell T5400 |
|
|
|
For a motherboard block diagram
Additional Notes* The PCI-X Bus, slots 5 and 6 are a shared bus. If you use the KONA card in any of the PCI-X slots the remaining slots must be empty. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: Boxx 8400 / SuperMicro X7DWA-N |
|
|
|
For a motherboard block diagram
Additional Notes* If using the PCI-X version of the KONA card in slot 1, slot 2 must be empty. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expansion Slot Placement for: HP XW 8400 / Boxx 8300 / TYAN S2696 |
|
|
|
For a motherboard block diagram
Additional Notes*
There are subtle engineering diffference between the Tyan S2696 Motherboard
|
| Option 1 | ||
| Slot 1 | PCI 33Mhz | |
| Slot 2 | PCI-e 16x | GPU |
| Slot 3 | PCI-e 8x (4x) | Storage |
| Slot 4 | PCI-e 16x (4x) | 3 / LHe |
| Slot 5 | PCI-X 133 | Storage |
| Slot 6 | PCI-X 100 | Storage |
| Slot 7 | PCI-X 100 | Storage |
Expansion Slot Placement for: HP XW 9400 / Boxx 7500 / TYAN S2915 |
|
|
|
For a motherboard block diagram
|
| Option 1 | ||
| Slot 1 | PCI-e 8x | Storage |
| Slot 2 | PCI-e 16x | GPU |
| Slot 3 | PCI 33Mhz | |
| Slot 4 | PCI-e 8x | Storage |
| Slot 5 | PCI-e 16x | 3 / LHe |
| Slot 6 | PCI-X 133 | Storage |
| Slot 7 | PCI-X 133 | Storage |
Expansion Slot Placement for: HP XW 9300 / Boxx 7400 / TYAN S2895 |
|
|
|
For a motherboard block diagram
|
| Option 1 | Option 2 | Option 3 | ||||||||
| Slot 1 | PCI-e 16x | GPU | Slot 1 | PCI-e 16x | GPU | Slot 1 | PCI-e 16x | GPU | ||
| Slot 2 | PCI 33Mhz | Slot 2 | PCI 33Mhz | Slot 2 | PCI33Mhz | |||||
| Slot 3 | PCI-e 16x | 3/LHe | Slot 3 | PCI-e 16x | Storage | Slot 3 | PCI-e 16x | Storage | ||
| Slot 4 | PCI-X 100 | Storage | Slot 4 | PCI-X 100 | 3 / LH | Slot 4 | PCI-X 100 | Storage | ||
| Slot 5 | PCI-X 100 | Storage | Slot 5 | PCI-X 100 | Empty | Slot 5 | PCI-X 100 | Storage | ||
| Slot 6 | PCI-X 133 | Storage | Slot 6 | PCI-X 133 | Storage | Slot 6 | PCI-X 133 | 3 / LH | ||
Expansion Slot Placement for: HP XW 8200 / TYAN S2676 |
|
|
|
For a motherboard block diagram
Additional Notes* There are subtle engineering diffference between the Tyan S2676 Motherboard and the XW8200. The S2676 Motherboard does not support a the PCIe model of the KONA card as it does not have a PCIe 4x slot
|
| Option 1 | Option 2 | Option 3 | ||||||||
| Slot 1 | PCI 33Mhz | Slot 1 | PCI 33Mhz | Slot 1 | PCI 33Mhz | |||||
| Slot 2 | PPCI-e 16x | GPU | Slot 2 | PCI-e 16x | GPU | Slot 2 | PCI-e 16x | GPU | ||
| Slot 3 | PCI 33Mhz | Slot 3 | PCI 33Mhz | Slot 3 | PCI 33Mhz | |||||
| Slot 4 | PCI-e 4x | 3/LHe | Slot 4 | PCI-e 4x | Storage | Slot 4 | PCI-e 4x | Storage | ||
| Slot 5 | PCI-X 133 | Storage | Slot 5 | PCI-X 133 | 3 / LH | Slot 5 | PCI-X 133 | Storage | ||
| Slot 6 | PCI-X 100 | Storage | Slot 6 | PCI-X 100 | Storage | Slot 6 | PCI-X 100 | 3 / LH | ||
| Slot 7 | PCI-X 100 | Storage | Slot 7 | PCI-X 100 | Storage | Slot 7 | PCI-X 100 | Empty | ||
Expansion Slot Placement for: SuperMicro X7DA8 / X7DA3 / X7DAE |
|
|
|
For a motherboard block diagram
|
| Option 1 | ||
| Slot 1 | PCI-e 16x | GPU |
| Slot 2 | PCI 33Mhz | |
| Slot 3 | PCI-e 16x (4x) | 3 / LHe |
| Slot 4 | PCI-X 133 | Storage |
| Slot 5 | PCI-X 133 | Storage |
| Slot 6 | PCI-X 100 | Storage |
Expansion Slot Placement for: Dell Precision 690 |
|
|
|
Motherboard block diagram NOT AVAILABLE |
| Option 1 | Option 2 | |||||
| Slot 1 | PCI-e 4x | Storage | Slot 1 | PCI-e 4x | Storage | |
| Slot 2 | PCI-e 16x | GPU | Slot 2 | PCI-e 16x | GPU | |
| Slot 3 | PCI-e 4x | 3/LHe | Slot 3 | PCI-e 4x | Storage | |
| Slot 4 | PCI 33Mhz | Slot 4 | PCI 33Mhz | |||
| Slot 5 | PCI-X 100 | Storage | Slot 5 | PCI-X 100 | Empty | |
| Slot 6 | PCI-X 100 | Storage | Slot 6 | PCI-X 100 | 3 / LH | |
| Slot 7 | PCI-e 4x | Storage | Slot 7 | PCI-e 4x | Storage | |
Expansion Slot Placement for: Dell Precision 490 |
|
|
|
Motherboard block diagram NOT AVAILABLE |
| Option 1 | Option 2 | |||||
| Slot 1 | PCI-e 4x | SAS Card | Slot 1 | PCI-e 4x | SAS Card | |
| Slot 2 | PCI-e 16x | GPU | Slot 2 | PCI-e 16x | GPU | |
|
||||||
| Slot 3 | PCI-e 4x | 3/LHe | Slot 3 | PCI-e 4x | Storage | |
| Slot 4 | PCI 33Mhz | Slot 4 | PCI 33Mhz | |||
| Slot 5 | PCI-X 100 | Storage | Slot 5 | PCI-X 100 | Empty | |
| Slot 6 | PCI-X 100 | Storage | Slot 6 | PCI-X 100 | 3 / LH | |