D10CEA
SDI to Analog Audio/Video
The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
Specifications
Inputs| SDI (SMPTE 259M) w/Embedded Audio, 1x BNC |
Outputs
| Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video) |
| Audio: 4 Channel Balanced/Unbalanced |
| Video/Audio Outputs on 25 Pin D Connector |
| 2 SDI Re-Clocked Loop-Thru, 2x BNC |
Frequency Response
| Video, +/- .25dB to 5Mhz, Audio, +/- .5dB to 20Khz |
User Controls
| External Dipswitch |
| Video Format |
| Pedestal |
| H/V Blanking |
| Audio Group 1 - 4 |
Audio Level (adjustable via switch selection):
|
Power
| 5VDC Regulated, 4 Watts, Power Supply Required (sold separately) |
Size
| 5.8" x 3.1" x 1" (147 x 79 x 25mm) |
D10CEAClick to view larger |
 |