 |
| Archived Software Downloads |
|
|
Io HD Software
Io HD Driver Version 5.1 (16MB TAR archive)
(Release Date 1/24/2008)
With this release, users can now output either DVI or HDMI protocol on the HDMI output. This release also provides other improvements and fixes. The archive includes software, release notes, user manual, and utilities. Please read documentation before installing software on your Io HD system. This software should not be used with any other AJA product (KONA, Io, Io LA, Io LD).
Io HD Driver Version 1.1 (16MB TAR archive)
(Release Date 12/10/2007)
This release updates the Io HD to have OSX "Leopard" compatibility. The release also adds support for 720p50 and provides other improvements and fixes. The archive includes software, release notes, user manual, and utilities. Please read documentation before installing software on your Io HD system. This software should not be used with any other AJA product (KONA, Io, Io LA, Io LD).
Io/IoLA/IoLD Driver Software
Io HD Driver Version 1.0 (16MB TAR archive)
(Release Date 10/15//2007)
This is the initial release of Io HD software. The archive includes software, release notes, user manual, and utilities. Please read the included ReadMe and Release Notes before installing software on your Io HD system. This software should not be used with any other AJA product (KONA, Io, Io LA, Io LD).
Io Driver V2.1 for Io/IoLA/IoLD (13MB ZIP archive)
(Release Date 10/14/2005)
This download improves and changes how Easy Setups are installed. There are also fixes to the PAL 8 and 10 bit Uncompressed Easy Setups. There is no change to the driver.
Io Driver V2.0 for Io/IoLA/IoLD (13MB ZIP archive)
(Release Date 6/27/2005)
This download works for all Io models.
Io Driver V1.3.1 for Io/IoLA/IoLD (3MB archive)
(Release Date 9/23/2004)
Io Driver V1.2 for Io/IoLA/IoLD (2.6MB archive)
(Release Date 3/25/2004)
Io/IoLA/IoLD Control Panel and Firmware Software
Io Control Panel V1.1 with related Firmware
Please read the PDF document included in this .zip archive before using the software. It contains operating instructions and important information about the release. This version adds Proc Amp controls to the Io Control Panel. New Firmware is required to use this version of Io Control Panel software (it is also included in the archive). This download works for all Io models.
Io Control Panel V1.0.0 with related Firmware
Please read the PDF document included in this .zip archive before using the software. It contains operating instructions and important information about the release. This version adds Proc Amp controls to the Io Control Panel. New Firmware is required to use this version of Io Control Panel software (it is also included in the archive). This download works for all Io models.
Io Firmware Update v21-26 (484KB ZIP)
(Release Date 3/18/2005)
Reduces jitter on the outputs when operating in freerun mode.
IoLA Firmware v3.7 for IoLA (480KB ZIP)
(Release Date 4/17/2005)
Supports the new Io Control Panel application software.
IoLA Firmware v2.6 for IoLA (480KB ZIP)
(Release Date 3/18/2005)
Reduces jitter on the outputs when operating in freerun mode.
IoLD Firmware v3.5 for IoLD (480KB ZIP)
(Release Date 6/22/2005)
Supports the new Io Control Panel application software.
IoLD Firmware v1.3 for IoLA (484KB ZIP)
(Release Date 3/18/2005)
Reduces jitter on the outputs when operating in freerun mode.
Io Firmware Update Instructions for above versions (Io/IoLD/IoLA)
Io Software Update Release Notes V1.3.1
IoLA Firmware v2.4 for IoLA (448KB archive)
(Release Date 4/6/2004)
Io Firmware Update v21-24 (500KB archive)
(Release Date 4/6/2004)
|
|
 |
Minimum Io HD System Requirements Hardware
• MacPro 2.66GHz “4 core” (MA356LL/A) or 2.0GHz or 3.0GHz “build-to-order”,2GB or more system RAM
• MacPro 2.66Ghz “8 core” (MA356LL/A) or 2.0GHz or 3.0GHz “build-to-order”,2GB or more system RAM
• MacBook Pro (2.33GHz Core 2 Duo minimum), 2GB or more of system RAM, ExpressCard/34 FireWire 800 card or ExpressCard/34 Sata Controller
• Power Mac G5 Quad 2.5GHz (M9592LL/A), 2GB or more system RAM
Notes: unlisted Macintosh G5 configurations may not provide the full functionality or features that
the Io HD in combination with the listed configurations (in this table) can provide.
Not all CPUs provide sufficient processing for native DVCProHD playback. If dropped frames occur when attempting playback of DVCProHD material when using a particular CPU, users can place the DVCProHD material on a timeline with the Apple ProRes 422 sequence settings. Additionally, if Dynamic RT reports dropped frames during playback of DVCProHD material from the Apple ProRes 422 timeline, rendering the sequence may also be required for realtime playback.
• Intel XServe Quad 2.0Ghz (MA409LL/A), 2GB or more of system RAM
Io HD Software requirements
• Mac OS X v10.4.9
• QuickTime 7.1.6 or later
• Final Cut Studio 2
Minimum Io and Io LA / LD System Requirements:
• Power Mac G4, dual 800 MHz (or single 933 MHz G4); use a minimum dual 1GHz for RT.
• For portable operation, a 17” Powerbook with dual port FireWire 800 PCMCIA card (see Frequently Asked Questions for additional information on this PowerBook configuration).
• Follow the RAM requirements specified for your Final Cut Pro system configuration in the Final Cut documentation. At least 2Gb RAM is recommended.
• For storage, use 4 ATA/IDE or 4 SCSI hard drives configured as a RAID. Use OS X version 10.2.5 or newer.
Io, IoLA, IoLD Recommended System:
Power Mac dual G5 with Apple Xserve RAID for storage. OS X Panther or later is recommended.
|
 |
 |
Find Support for Your Product
|
|
Contact Support
443 Crown Point Circle
Grass Valley, CA 95945 USA
Phone: +1-530-271-3190
Fax: +1-530-274-9442
» Contact Support Form |
|
| |
|
